ReadyPlanet.com
dot dot


Thermal Spray Process > ARC_Spray_Application

ARC_Spray_Application

 

Arc Spray Application
In the Arc Spray Process pair of electically conductive wires ane melted by means of an electric arc. The molten material is atomized by compressed air and propelled towards the substrate surface. The impacting molten particles on the substrate rapidly solidify to form a coating. This arc spray process carried out correctly is called a "cold process" (relative to the substrate material being coated) as the substrate temperature can be kept low during processing avoiding damage, metallurgical changes and distortion to the substrate material.


Copyright © 2010 All Rights Reserved.


Head Office: Ayutthaya
Advanced Surface Technologies Co.,Ltd.
1/2 Moo 6 T. Sammuang A.Ladbualuang Ayutthaya 13230
Tel. 035-378-329, 035-378-330, 035-378-331
Fax. 038-637-273, 038-637-274
Email: ast@surfacetechno.com


Branch: Rayong (Mapkha)
Advanced Surface Technologies Co.,Ltd.
107/2 Moo 5, T.Mapkha, A.Nikhompattana Rayong 21180
Tel. 038-637-287, 038-637-288, 038-637-289
Fax. 038-637-273, 038-637-274
Email: ast@surfacetechno.com


Branch: Rayong (Khaochomhae)
Advanced Surface Technologies Co.,Ltd.
199 Moo 7, T.Makhamkoo, A.Nikhompattana Rayong 21180
Tel. 038-917-620
Fax. 038-917-259
Email: ast@surfacetechno.com